All the Control Arm Bushings that Energy Suspension makes can be found below. To find the Control Arm Bushings that fit your specific vehicle, select your vehicle from the dropdown list.
Energy Suspension polyurethane control arm bushings are available in black or red. Select your vehicle on the right to find the kit for your vehicle!
A control arm bushing plays a vital role in a suspension. Replace that faulty O.E. rubber bushing with an Energy Suspension Hyperflex control arm bushing. These polyurethane bushing provide the longevity and performance needed to maximize a suspension's efficiency.
Energy Suspension's Hyperflex polyurethane is a firmer bushing than the O.E. Not only does this increase the longevity of the bushing, but gives the suspension a boost in handling performance. With a firmer bushing there will be a slight increase in NVH (noise, vibration and harshness), but most drivers prefer the boost in performance in spite of that.
As your suspension travels, a rubber control arm bushing is repeatedly stretching and flexing. After a while, the center sleeve begins to sag and your suspension alignment is throw out of whack. The sagging will go on until the rubber fails completely.
A control arm bushing rotates a lot against the metal shell, so make sure you grease it well with Energy Suspension's own Formula 5 Bushing Lubricant. Using plenty of grease is the best way to ensure a long lasting part without any squeaking. If you'd like some extra grease just in case, pick up an extra 3 pack or an 8 ounce tube.